Sekonic L-358 Manuel d'utilisateur télécharger pdf (Page 32)

-28-

6. Advanced Functions

MODE

7. Wireless flash radio triggering function

With the radio transmitter module plugged into the meters radio compartment and a receiver

(PocketWizard

products) connected to one or more electronic flash units, the meter provides a

convenient system that enables one person working alone to measure flash output without the need

of a sync cord. Pressing the measuring button simultaneously triggers the flash and measures the

light.

The L-358 has 32 triggering channels with the RT-32N radio transmitter module (optional). Channels

1-16 provide single triggering, while channels 17-32 offer selective quad-triggering capability. Selecting

one of channels (17-32) provides control of up to four additional Quad-triggering zones (A, B, C and

D). Selecting or deselecting of zone lighting is possible with Quad-triggering zone. In order to trigger

flash units set for Quad-triggering zone, the electronic flash unit must be connected to the

PocketWizard MultiMax. With the PocketWizard Plus or Plus II triggering channels 1-4 can be selected.

< Example with PocketWizard 32 channels transceiver >

1. Open battery compartment cover !6 , remove

connector cover @2 and set the RT-32N radio

transmitter module (optional) by aligning the

connector with the pins.

2. Switch to the Wireless flash radio triggering setting

mode

by using Jog wheel t while pressing mode

set button !0.

CAUTION

•To prevent damage due to static electricity, release static electricity stored in your body

by touching a metal object nearby (door knob, aluminum window frame, etc.) before

touching the radio transmitter module.

RT-32N

radio transmitter

module

3. The set channel number will blink at this time.

Turn the Jog wheel to set the channel setting.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 51 52

Pas de commentaire

Sekonic L-358 Manuel d'utilisateur Page 32