Sekonic DIGI MASTER L-718 Instructions d'exploitation télécharger pdf (Page 11)

Ambient Light Measurement

Measuring ambient light, whether it is daylight or standard electric light, is a

fairly simple matter using either incident or reflected light method.

(2) Set the film speed (ISO) and shutter

speed (in T-Priority mode) as shown

in the paragraphs for “Preparing the

Meter for Operation”.

When you use the meter in F-priority

mode, set the film speed (ISO) and

F-stop value.

(3) Press the measuring switch. The

appropriate F-stop value (or shutter

speed) is displayed on the meter

(Fig. 23).

(4) If the measuring switch is kept

depressed, the display gives a

continuous reading of the changes

in brightness.

(5) When the measuring range is

exceeded, E.u. (underexposure) or

E.o. (overexposure) mark is

displayed (Fig. 24).

<NOTE>

• F-priority and T-priority can be

converted by pressing F/T

selection key (Fig. 25)

• F and EV measurement can also be

converted by pressing F/EV selection

key (Fig. 26)

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Sekonic DIGI MASTER L-718 Instructions d'exploitation Page 11