Sekonic SR-6500 Instructions d'exploitation télécharger pdf (Page 98)

-97-

Cleaning

Dirty rollers, reading lenses, and sensors can cause various operational errors. Clean them

regularly using the following procedures. Cleaning intervals differ depending on usage

conditions (usage frequency, quality of paper used, etc.) Cleaning periods are for your

reference -- clean the device soon if you notice dirt or other irregularities.

Note)

Always turn the power off when cleaning.

(1) Cleaning rollers

After feeding 5,000 sheets, a large number of cards, or when using

carbon paper, wipe the rollers softly with a clean cloth slightly wetted with

disinfectant alcohol (ethanol).

* If the rollers are stained, the stains may rub off on cards or other various

malfunctions may occur.

(2) Cleaning reading lens

Clean the reader lens by softly wiping it with a clean cloth slightly wetted

with disinfectant alcohol (ethanol) once a month or every 5,000 sheets.

* If the reading lens is stained, reading errors may occur.

(3) Cleaning various sensors

Softly wipe the sensors with a clean cloth slightly wetted with disinfectant

alcohol (ethanol) once a month or every 5,000 sheets.

Use air blow etc. when cleaning the left skew sensor section.

*If the sensors are stained (with paper powder, etc.) detection errors may

occur.

Cleaning

Hopper sheet

0 detection sensor

Paper-feeding roller

Aligning roller

SR-3565(E).indd 97SR-3565(E).indd 97 2007-8-16 10:21:122007-8-16 10:21:12

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 129 130

Pas de commentaire

Sekonic SR-6500 Instructions d'exploitation Page 98