Sekonic L-508 CINE ZOOM MASTER Manuel d'instructions télécharger pdf (Page 5)

3. Before Using

4. Replacing battery during measurement or when using the memory function

• Always turn the power OFF before replacing batteries. If batteries are removed with the power

ON, measurements and settings in memory can no longer be recalled.

• If after replacing the battery, or during measurements, strange screens (displays that have

not been set) appear in the LCD, or nothing happens, no matter what button is pushed,

remove the battery and wait at least ten seconds and then replace the battery. This allows the

software to automatically reset, and is not a malfunction.

WARNING:

• Never place batteries in fire, short, disassemble, or heat them. The batteries might break

down, and cause an accident, injury or pollute the environment.

5. Auto Power Off function

• To conserve battery power, the meter will turn off about twenty minutes after last use.

• Whether the Auto Power Saving feature turns the power off or the Power button 7 is pressed,

the settings and measured values remain stored in memory. When the Power button is

pressed again the last settings are displayed.

6. Setting main ISO film speed

• Hold down the ISO button 11 and turn the Set/change

dial 5

to select ISO speed for the film being used

• You can also change the ISO film speed after taking

measurements. The new value is automatically

displayed.

7. Setting second ISO film speed

• This feature is useful when using a second film with

different ISO speed, using Polaroid

™ proofing film, or

for exposure correction (when using a filter, close-up

photography, etc.).

1. Hold down the ISO 2 button 6 and turn the Set/change

dial to select ISO speed of the film being used.

2. Once this is set, after taking a measurement, the

measured value for the second film speed will be

displayed when the ISO 2 button is depressed.

3. You can also change the second ISO film speed after taking

measurements. The new value is automatically is displayed.

-5-

4. Basic Operation

-6-

1 2 3 4 5 6 7 8 9 10 ... 15 16

Pas de commentaire

Sekonic L-508 CINE ZOOM MASTER Manuel d'instructions Page 5